How to add a VTO to XVR

Chris
2021-08-23 22:24

Step 1 Select Main Menu > CAMERA > CHANNEL TYPE.

The CHANNEL TYPE interface is displayed.

Step 2 Configure the channels.

You can enable the IP channels by disabling the corresponding analog
channels. The Device also provides expanded IP channels for your use, such as
the 17–32 channels

  • The 17–32 channels are only for IP cameras(or  VTO) and the range changes dependent on the model you purchased.
  • The channel selection for analog camera or IP camera are in sequence, for example, if you want to select channels for IP camera, you need to select from the last channel number Channel 16 first, which means, you cannot jump to select the channel 15 directly until you have selected the channel 16.

Step 3  Click Apply and follow the onscreen instructions to complete the settings

Step 4  Select Main Menu > CAMERA > REGISTRATION > Registration, the Registration interface is displayed. 

 

Step 5 Adding VTO Automatically

On the Registration interface, click Device Search.

The searched devices are displayed

Select the check box of the device.

Click Add and input the VTO password.

Tags: Dahua XVR, Intercom, VTO, XVR
Average rating: 0 (0 Votes)

You cannot comment on this entry