How to setup a VTO and VTH device on a network

Fre'd
2020-03-04 17:35

Description

This guide will show how to setup a VTO and VTH device on a network

This guide will use a VTO2000A-S and VTH1510-S

Prerequisites

  • VTO and VTH initialized and set up on network
  • VTO and VTH log in information

VTO Setup

1. Log into the web interface of the VTO by entering the IP

You can find the current IP of the VTO by using VDPConfig from a local computer

Enter the IP into Internet Explorer

2. The Device Initialization will appear if this device has not been initialized

Device Initialization Steps:

3. Log into the device by entering the Username and Password and click Login

4. Click Local Setting

5. Under Basic settings, confirm the information being used.

In this example we will use the default

Villa Call No. = 9901

6. Now the SIP function must be enabled and configured

Click Network Settings

7. Click SIP Server

8. In this example, the VTO device itself will act as the SIP server

To make changes to SIP Server settings, start by unchecking the box next to Enable

The fields can now be edited

  • Server Type - VTO
  • IP Address - IP Address of VTO device , in this example 192.168.2.163
  • Port - 5060 - Leave at default
  • SIP Server Username - Default(No change)
  • SIP Server Password - Default(No change)

9. Once all information has been entered, check the box to enable SIP Server

10. Click 'Save' to save settings

VTH Setup

1. Power on the VTH

Device Initialization will appear if this device has not been initialized

Stand Alone VTH and VTO Setup - SIP - 16.jpg

  • Password - create a password for the device
  • Confirm Pwd - confirm created password
  • Email - email address used for password recovery

Select OK once all information has been entered

2. A message will confirm successful device initialization

Stand Alone VTH and VTO Setup - SIP - 17.jpg

3. From the Main Menu 'long press' or tap and hold the 'Setting' button for over 6 seconds to enter Advanced Settings

Stand Alone VTH and VTO Setup - SIP - 18.jpg

4. Enter the password for the device and select OK

Stand Alone VTH and VTO Setup - SIP - 19.jpg

5. Network

Confirm the IP information for the VTH device

Stand Alone VTH and VTO Setup - SIP - 20.jpg

6. VTH Config

Tap the field next to 'Room No.' to change the setting

Stand Alone VTH and VTO Setup - SIP - 21.jpg

The VTH Room No. will be the VTO's Villa Call Number with an added '#0'

In this example we will use the VTO's Call No. of 9901 + #0

9901#0

Tap OK once the information has been entered

Stand Alone VTH and VTO Setup - SIP - 22.jpg

7. SIP Server

In this example the VTO has been configured to act as the SIP Server, so the VTO device information will be entered in this section in the highlighted fields

All other fields should be left at their default settings

  • Server IP - IP Address of VTO
  • User Name - Default (No change)
  • Login Pwd - Default (No change)

Stand Alone VTH and VTO Setup - SIP - 23.jpg

8. Once the information has been entered

Tap the toggle next to 'Enable Status' to On

Tap OK to save settings

Stand Alone VTH and VTO Setup - SIP - 24.jpg

9. VTO Config

Enter the information for the VTO device:

Stand Alone VTH and VTO Setup - SIP - 25.jpg

10. Once the information has been entered

Tap the toggle next to 'Enable Status' to On

Stand Alone VTH and VTO Setup - SIP - 26.jpg

11. A message will pop up to confirm

Stand Alone VTH and VTO Setup - SIP - 27.jpg

12. The VTH is now configured

Tap the Home icon in the top right to return to the Home screen

Stand Alone VTH and VTO Setup - SIP - 28.jpg

13. Once the devices have been both configured properly it can take a few minutes for the devices to complete the connection between the devices

You can monitor the status of the connection by checking the upper right corner of the VTH

This icon will be displayed when there is no active connection to the VTO:

VTH no connection icon.jpg

14. Once the icon has been cleared then the devices should be ready to communicate.

Stand Alone VTH and VTO Setup - SIP - 29.jpg

15. Test a call by pressing the call button on the VTO and you should receive a call at the VTH

Stand Alone VTH and VTO Setup - SIP - 30.jpg

Tags: intercom
Average rating: 3 (1 Vote)

You cannot comment on this entry